If your network does not have a DHCP server and the LK301E’s LED keeps flashing, you can manually assign a static IP address by connecting the device directly to your computer. An Internet connection is not required. Step 1: Connect the LK301E to Your Computer Step 2: Configure Your Computer’s Ethernet Settings Step 3: Access…
Introduce to add printer to computer quickly with tool
Wireless Network Connection The process can be completed via a computer or a smartphone.(Note：Here are the network configuration steps for when the print server is in its initial state. If you can not find “USBRPRINT-xxxx”,please press the reset button for 5s to restore initial settings.) Net Step: Add your printer to the computer After completing the network…
This mode allows your computer to communicate directly with the print server without connecting to a router or the Internet. Step 1: Connect to the Print Server Wi-Fi SSID: USBServer-Setup Note: This Wi-Fi network is created by the print server and does not provide Internet access. This is normal. If a network configuration page pops…
This mode allows your computer to communicate directly with the print server without connecting to a router or the Internet. Step 1: Connect to the Print Server Wi-Fi SSID: USBServer-Setup Note: This Wi-Fi network is created by the print server and does not provide Internet access. This is normal. If a network configuration page pops…
When connecting the device on Windows, the following error message appears: “Driver installation completed but verification failed” Solution Please download and install our updated Windows tool from the link below: https://www.xiiaozet.net/download123/1447/?tmstv=1727080639 After installation: In most cases, the updated tool resolves the driver verification problem on Windows systems. If the issue still persists after using the…
If your computer is connected to the router using a network cable and does not have Wi-Fi capability, you can first use your mobile phone to configure the print server’s Wi-Fi connection. Method 1: Configure Wi-Fi Using a Mobile Phone Method 2: Configure Wi-Fi Through the Web Management Page If Wi-Fi configuration cannot be completed…
If you connected printers to the print server, but the software or web management page can not detect the printer(s), and the USB indicator light for the printer is OFF, this usually means the device has not successfully recognized that printer. In most cases, the issue can be resolved by following the steps below. Step…
If you followed the installation tutorial successfully but still cannot print a test page, please check the following troubleshooting steps: 1. Try Printing a File Directly From Your PC After the printer driver is installed successfully, if the Driver Assistant cannot print the test page, please try printing a normal file directly from your local…
Xiiaozet Virtual USB Sharing Solution: AI’s Physical World Pass
No products in the cart.
