Windows

How to Fix HP Printer Not Working Properly After Connecting to a Print Server?

Byxiaoxing 18/03/202518/03/2025

Issue Description If your HP printer is not functioning properly after connecting to a print server, it may be due to HP Smart Install restrictions. To use the print server normally, HP Smart Install must be disabled. How to Disable HP Smart Install? Method 1: Disable HP Smart Install via Printer LCD Screen 🔹 For…

How to Share a Printer to Other Computers

Byxiaoxing 17/12/202407/02/2025

This document provides a detailed guide on how to share a printer connected to a print server with other computers on the same local network. The instructions cover both Windows and macOS systems. Prerequisites Sharing the Printer Windows computers on the network can add the shared printer by following the second step of the Windows…

Indictors and Interfaces Description

Byxiaoxing 16/12/202407/02/2025

Introduce indictors and interfaces

Resolving Unrecognized Printer Driver in Quick Installation Tool

Byxiaoxing 06/12/202406/12/2024

If the quick installation tool fails to recognize your printer driver, you can manually use the printer driver already installed on your computer. Follow the steps below: Step 1: Locate and click the “Settings” option in the tool interface. Step 2: In the settings menu, choose “Use Local Driver”. Step 3: Browse through the list…

Windows | Windows-LK100W | Windows-LK300W

How to Manually Add Printer to Computer with IP address (Windows)

Byxiaoxing 16/09/202410/04/2025

Note: We recommend using our independently developed quick installation tool for adding printers. Manual installation should only be considered if the quick installation tool is unavailable or cannot be used. Our print server supports print protocols: RAW protocol, IPP protocol. Here are the steps to add a printer that supports RAW protocol. !!! You need…

Windows | Windows-LK300EW

Resolving the “LK300EW Device Requests a USB License” Issue

Byxiaoxing 19/08/202420/08/2024

Typically, when the device connects to the network, it automatically authorizes the user to connect up to three USB devices simultaneously. If automatic authorization does not occur, you can manually authorize the device using the virtual USB tool. Steps for Manual Authorization:

Print Server Restarts or Shuts Down When Connecting a USB Cable to a Printer

Byxiaoxing 17/08/202420/08/2024

Cause Analysis: Resolution Steps:

Unable to Access the Web Management Page

Byxiaoxing 17/08/202405/12/2024

Cannot enter the web management page through xiiaozet.local. Resolution Steps

What to Do If Wireless Network Configuration Fails

Byxiaoxing 16/08/202405/12/2024

Note: Cloud light steady on or access to the web management page via xiiaozet.local indicates successful configuration. Resolution Steps:

Unable to Detect Own Wi-Fi Signal During Network Configuration?

Byxiaoxing 16/08/202420/08/2024

During Wi-Fi network setup, users are unable to connect to their own Wi-Fi signal or fail to find their own Wi-Fi signal in the Wireless List. Cause Analysis The print server supports only the 2.4 GHz frequency band. If the router’s Wi-Fi name is set to broadcast on the 5 GHz band, the print server…