| | | | | | | | |

How to Fix HP Printer Not Working Properly After Connecting to a Print Server?

Byxiaoxing

Issue Description If your HP printer is not functioning properly after connecting to a print server, it may be due to HP Smart Install restrictions. To use the print server normally, HP Smart Install must be disabled. How to Disable HP Smart Install? Method 1: Disable HP Smart Install via Printer LCD Screen 🔹 For…

| | | |

Step2: How to Add Printer to Computer Manually via Hostname (Mac)

Byxiaoxing

This document provides a detailed guide on how to configure a print server on a Mac. It assumes you have already completed the network configuration of the print server. If not, please refer to the relevant network configuration guide first. 💡Important Tip: Connect the USB Printer ProperlyPlease connect the USB cable of your printer to…

| | | | |

How to Share a Printer to Other Computers

Byxiaoxing

This document provides a detailed guide on how to share a printer connected to a print server with other computers on the same local network. The instructions cover both Windows and macOS systems. Prerequisites Sharing the Printer Windows computers on the network can add the shared printer by following the second step of the Windows…

| | | | |

Resolving Unrecognized Printer Driver in Quick Installation Tool

Byxiaoxing

If the quick installation tool fails to recognize your printer driver, you can manually use the printer driver already installed on your computer. Follow the steps below: Step 1: Locate and click the “Settings” option in the tool interface. Step 2: In the settings menu, choose “Use Local Driver”. Step 3: Browse through the list…

| |

How to Manually Add Printer to Computer with IP address (Windows)

Byxiaoxing

Note: We recommend using our independently developed quick installation tool for adding printers. Manual installation should only be considered if the quick installation tool is unavailable or cannot be used. Our print server supports print protocols: RAW protocol, IPP protocol. Here are the steps to add a printer that supports RAW protocol. !!! You need…