User Guide- LK301E to Share USB Device Over Local Network for macOS
Introduce to configure print server to network
Introduce to configure print server to network
このツールを使用すると、LK100EWまたはLK300EW経由で、USB接続のプリンター、スキャナー、USBメモリ等をネットワーク上で共有できます。 💡 基本原理 プリンターまたはスキャナーの接続 このツールは、Windows 標準の TCP/IP 共有印刷に対応していない一部のプリンターにも対応しています。たとえば: こうしたモデルでは、Windows の通常のネットワークプリンター機能が使えないため、Virtual USB Connect Tool を使用することで、ネットワーク共有を実現します。 このツールは、USB ケーブルの抜き差しをソフトウェアで仮想的に再現し、プリンターやスキャナーを パソコンに直接接続したかのように動作させます。接続後は、USB接続時と同様に、一般的な使用が可能になります。 その他のUSB機器の接続 スキャナーやUSBメモリといった他のUSB機器も同様に接続可能です。 注意: 使用前の準備 使用手順 ① プリンター/スキャナーを接続する ② その他のUSB機器の接続 よくある問題と対策(Mac向け)
Issue Description If your HP printer is not functioning properly after connecting to a print server, it may be due to HP Smart Install restrictions. To use the print server normally, HP Smart Install must be disabled. How to Disable HP Smart Install? Method 1: Disable HP Smart Install via Printer LCD Screen 🔹 For…
This document provides a detailed guide on how to configure a print server on a Mac. It assumes you have already completed the network configuration of the print server. If not, please refer to the relevant network configuration guide first. 💡Important Tip: Connect the USB Printer ProperlyPlease connect the USB cable of your printer to…
This document provides a detailed guide on how to share a printer connected to a print server with other computers on the same local network. The instructions cover both Windows and macOS systems. Prerequisites Sharing the Printer Windows computers on the network can add the shared printer by following the second step of the Windows…
Introduce indictors and interfaces
Cause Analysis: Resolution Steps:
Cannot enter the web management page through xiiaozet.local. Resolution Steps
Note: Cloud light steady on or access to the web management page via xiiaozet.local indicates successful configuration. Resolution Steps:
During Wi-Fi network setup, users are unable to connect to their own Wi-Fi signal or fail to find their own Wi-Fi signal in the Wireless List. Cause Analysis The print server supports only the 2.4 GHz frequency band. If the router’s Wi-Fi name is set to broadcast on the 5 GHz band, the print server…
No products in the cart.