| | | | | | | | |

How to Fix HP Printer Not Working Properly After Connecting to a Print Server?

Byxiaoxing

Issue Description If your HP printer is not functioning properly after connecting to a print server, it may be due to HP Smart Install restrictions. To use the print server normally, HP Smart Install must be disabled. How to Disable HP Smart Install? Method 1: Disable HP Smart Install via Printer LCD Screen 🔹 For…

| | | |

Step2: How to Add Printer to Computer Manually via Hostname (Mac)

Byxiaoxing

This document provides a detailed guide on how to configure a print server on a Mac. It assumes you have already completed the network configuration of the print server. If not, please refer to the relevant network configuration guide first. 💡Important Tip: Connect the USB Printer ProperlyPlease connect the USB cable of your printer to…

| | | | | | |

How to Upgrade Firmware on Print Server

Byxiaoxing

Note: Firmware upgrades should only be performed if you are experiencing issues with your device. Under normal operating conditions, firmware upgrades are not required. Step 1: Access the Web Management Page Step 2: Upgrade the Firmware Step 3: Post-Upgrade Steps If you encounter any issues during the firmware upgrade, please contact us immediately. You can…

| | | | |

How to Share a Printer to Other Computers

Byxiaoxing

This document provides a detailed guide on how to share a printer connected to a print server with other computers on the same local network. The instructions cover both Windows and macOS systems. Prerequisites Sharing the Printer Windows computers on the network can add the shared printer by following the second step of the Windows…

| | | | | | |

How to Set a Static IP Address for Print Server

Byxiaoxing

Before starting, make sure that your computer is connected to the same network as the print server. This ensures that you can access the print server’s web management page without issues. If you are using a wired connection, select the ‘LAN Interface’ option. If you are using a wireless connection, select the ‘WiFi Interface’ option.