Unable to Find the “USBServer_Setup” Wi-Fi

During Wi-Fi network setup, users are unable to see the Wi-Fi hotspot named “USBServer_Setup” in the list of available networks.

Resolution Steps:

  1. Try Different Devices to Search for the Hotspot: Use a different smartphone or computer to search for the “USBServer_Setup” hotspot to rule out device compatibility issues.
  2. Reset the Print Server: While the print server is powered on, press and hold the reset button for 5-8 seconds. Release the button when the USB indicator light on the print server blinks rapidly, indicating that the reset process has started.
  3. Contact Support: If you are unable to resolve the issue after following the above steps, please contact our after-sales support team for further assistance.

Similar Posts

| | | |

“Unable to Locate the Printer” Error

Byxiaoxing

If you encounter the “Unable to locate the printer” message when sending a print job, it might be due to an incorrect address entered when adding the printer or unsuccessful network configuration. Here are the steps to resolve this issue: 1. Check the Network If the Cloud light is blinking and you cannot access the…

| | | | | | |

How to Set a Static IP Address for Print Server

Byxiaoxing

Before starting, make sure that your computer is connected to the same network as the print server. This ensures that you can access the print server’s web management page without issues. If you are using a wired connection, select the ‘LAN Interface’ option. If you are using a wireless connection, select the ‘WiFi Interface’ option.

| | | | | | |

How to Upgrade Firmware on Print Server

Byxiaoxing

Note: Firmware upgrades should only be performed if you are experiencing issues with your device. Under normal operating conditions, firmware upgrades are not required. Step 1: Access the Web Management Page Step 2: Upgrade the Firmware Step 3: Post-Upgrade Steps If you encounter any issues during the firmware upgrade, please contact us immediately. You can…

| |

How to Manually Add Printer to Computer with IP address (Windows)

Byxiaoxing

Note: We recommend using our independently developed quick installation tool for adding printers. Manual installation should only be considered if the quick installation tool is unavailable or cannot be used. Our print server supports print protocols: RAW protocol, IPP protocol. Here are the steps to add a printer that supports RAW protocol. !!! You need…

| | | | | | | | |

How to Fix HP Printer Not Working Properly After Connecting to a Print Server?

Byxiaoxing

Issue Description If your HP printer is not functioning properly after connecting to a print server, it may be due to HP Smart Install restrictions. To use the print server normally, HP Smart Install must be disabled. How to Disable HP Smart Install? Method 1: Disable HP Smart Install via Printer LCD Screen 🔹 For…

Leave a Reply

Your email address will not be published. Required fields are marked *