User Guide- LK301E to Share USB Device Over Local Network for macOS

Step 1: Configure Print Server to Connect to the Local Network

Wired Connection

Make sure the router or switch connected to the LK301E USB server has internet access and is in the same local network (LAN) as your computer.

  1. Connect the USB device to the USB port of the LK301E.
  2. Connect the network cable from the LAN port of the LK301E to your router or switch.
  3. The USB server will automatically obtain an IP address assigned by the router via DHCP.
  4. When the Cloud indicator stays solid, it means the wired network connection is successfully established.
    • Note:
      If your network does not use DHCP, or if you prefer to assign a static IP to the print server, you’ll need to manually configure the IP settings via the device management page.

Step 2: Use the Virtual USB Tool to enable USB device connectivity over the network

Download and install the Virtual USB Connect Tool.
Download
Connecting / Disconnecting to / from a USB device
  1. Run the “Virtual USB Client” software after installation.
  2. Right-click and select “Auto-Find USB Servers” to display the print servers available on your local network.
  1. Select the USB device you wish to connect to. Right-click on the device and choose “Use this device”. This action simulates a virtual connection between your printer or scanner and the computer.
  2. This action simulates a virtual connection between your USB device and the computer.
  1. Disconnect the device (if needed):
  • In the tool, click “Disconnect” to release the USB device so that it can be used by another computer.

Important Notes:

  • Each USB device can only be connected and controlled by one computer at a time.
  • One computer can connect and control up to 3 USB devices simultaneously.
  • If another computer needs to use a device, please disconnect it from the current computer first.
  • Ensure your computer is on the same local network as the print server to ensure proper discovery and connection.

Frequently Asked Questions

If your device is not recognized after clicking “Connect”, try the following troubleshooting steps:

  1. Check device compatibility:
    • Some USB devices, such as external hard drives, may not support virtual USB connections.
    • Compatibility can vary by brand—certain brands may work, while others may not.
  2. Physically connect the device to your computer:
    • Plug the USB device directly into your computer’s USB port to confirm that it works properly.
    • Some devices, like printers or scanners, need to be physically connected at least once so the system can install the necessary drivers.
    • After the drivers are installed, the virtual USB connection may start working correctly.

💡 Tip: Always ensure your USB device functions properly when connected directly before using it via the virtual connection.

A: To enable automatic connection to a specific USB device (as long as it’s available), follow these steps in the Virtual USB Connect Tool:

  1. Set virtual usb client to start automatically at boot
  2. In the device list, find the USB device you want to auto-connect to, then right-click the the device and choose “Auto-Use Device”.

✅ Once enabled, the tool will automatically reconnect to the selected USB device each time it starts or whenever the device becomes available on the network.

💡 Note:

  • If multiple computers have auto-connect enabled for the same device, only the first one to detect it will connect successfully.
  • Only one computer can auto-connect to a specific USB device at a time.

If you encounter an error during the connection process, try the following steps:

  1. Open the web management page of the USB server by entering xiiaozet.local or its IP address in your browser.
  2. Navigate to the System section and click Reboot to restart the device.
  3. After the reboot is complete, return to the Virtual USB Tool and refresh the device list.

If the issue persists after rebooting, please contact our support team for further assistance

Similar Posts

|

Schritt 2: Drucker auf einem Mac hinzufügen

Byxiaoxing

Sie können den Drucker auf Ihrem Mac entweder über die IP-Adresse oder den Hostnamen des Printservers hinzufügen. Bitte wählen Sie eine der beiden Methoden. Wichtiger Hinweis: USB-Drucker korrekt anschließen Bitte verbinden Sie das USB-Kabel Ihres Druckers mit dem USB-Anschluss des Printservers.Stellen Sie sicher, dass das quadratische Ende (Typ-B oder CN36) am Drucker angeschlossen ist und das flache Ende (Typ-A) am…

| | | |

Step2: How to Add Printer to Computer Manually via Hostname (Mac)

Byxiaoxing

This document provides a detailed guide on how to configure a print server on a Mac. It assumes you have already completed the network configuration of the print server. If not, please refer to the relevant network configuration guide first. 💡Important Tip: Connect the USB Printer ProperlyPlease connect the USB cable of your printer to…

| |

ステップ2: LK100EW / LK300EW Virtual USB Connect Tool – LAN経由でUSBデバイスを共有する方法 (WindowsOS用)

Byxiaoxing

このツールを使用すると、LK100EWまたはLK300EW経由で、USB接続のプリンター、スキャナー、USBメモリ等をネットワーク上で共有できます。 💡 基本原理 プリンターまたはスキャナーの接続 このツールは、Windows 標準の TCP/IP 共有印刷に対応していない一部のプリンターにも対応しています。たとえば： こうしたモデルでは、Windows の通常のネットワークプリンター機能が使えないため、Virtual USB Connect Tool を使用することで、ネットワーク共有を実現します。 このツールは、USB ケーブルの抜き差しをソフトウェアで仮想的に再現し、プリンターやスキャナーを パソコンに直接接続したかのように動作させます。接続後は、USB接続時と同様に、一般的な使用が可能になります。 その他のUSB機器の接続 スキャナーやUSBメモリといった他のUSB機器も同様に接続可能です。 注意： 使用前の準備 ※ Download 1 が使用できない場合は Download 2 をお試しください。両方とも動作しない場合は、サポートまでご連絡ください。 使用手順 ① プリンター／スキャナーを接続する ② スキャナーを使ってスキャンする ③ その他USB機器（USBメモリ等）の接続 よくあるトラブルと対処法

Leave a Reply

Your email address will not be published. Required fields are marked *